Flysky FS-i6 Multiprotocol Mod

Share your Drone Related DIY/MOD here
User avatar
DroneMesh
Site Admin
Posts: 182
Joined: Sun Sep 30, 2018 6:57 am

Sat Feb 02, 2019 6:07 am

marcruhl wrote:
Wed Nov 07, 2018 3:17 pm
I have got a working design now, but it still seems to be quite hard to print. It needs a perfectly leveled bed and quite a lot of support. I think I need about five days to further optimize it regarding 3D-Printing, if you want to tho, I can already send you the files to look at.
Sorry for needing so long, but I have quite a lot of stuff to do currently;)

I made the battery bay Flat, with inserts for AA batteries, AAA batteries or LiPos / LiIon's, so that you can individually choose which one you want and don't need to print a new housing when changing the battery type.

Here are some Pics of the current status (I know my print Quality currently SUCKS):

IMG_3513.JPG

IMG_3514.JPG

IMG_3512.JPG

IMG_3511.JPG

Any suggestions or ideas?

Is it ready for testing yet?

I would love to print it and show off your work on the channel.

keep me updated.
aacastro
Posts: 1
Joined: Sun Feb 24, 2019 4:01 am

Mon Feb 25, 2019 1:59 am

How do we bind the TBS crossfire on the flysky with a receiver?
Marshal
Posts: 1
Joined: Wed Apr 17, 2019 9:06 pm

Wed Apr 17, 2019 9:07 pm

Hi,
can you advice? how did you bind flysky with TBS?

I connect TBS as you to flysky (PPM out to module and +, -)

nanoRX to FC (+ - and signal)



Ok - few hours latter...

It works! cheap flysky+crosfire :o
you have to connect rx and tx (same uart eg. tx1 and rx1) to nanoRX.
After that you have to connect your crosfire via USB, after that every thing should go smoothly. In my example crosfire detects nanoRX and bind it automatically (of course using agent X from TBS)


gl guys!
tboon211
Posts: 1
Joined: Mon Jul 15, 2019 7:55 am

Tue Jul 23, 2019 6:23 am

HELLO I wanted to know how you did to bind the R9M with the R9mm on the Flysky i6x.
I made the connections well but I do not find how to binder. On the web I only see that we can bind with the frysky rx by also doing an update. That's why I'm asking for your help
Xmp
Posts: 1
Joined: Wed Nov 13, 2019 2:49 pm

Wed Nov 13, 2019 2:51 pm

tboon211 wrote:
Tue Jul 23, 2019 6:23 am
HELLO I wanted to know how you did to bind the R9M with the R9mm on the Flysky i6x.
I made the connections well but I do not find how to binder. On the web I only see that we can bind with the frysky rx by also doing an update. That's why I'm asking for your help
Same problem here. Any solution yet?
donald.golliday
Posts: 1
Joined: Sun Dec 01, 2019 7:27 am

Sun Dec 01, 2019 7:29 am

WI'll this mod work on the Fs-i6s
Post Reply