DroneMesh VUSB All in One Dongle Wireless Simulator for Frsky Flysky Spectrum Futaba Transmitter

Post Reply
User avatar
DroneMesh
Site Admin
Posts: 182
Joined: Sun Sep 30, 2018 6:57 am

Sat Dec 22, 2018 5:42 pm

Link For Purchase:
http://bit.ly/2Bw3F1d

Description:
The DroneMesh VUSB AIO was developed in order to bring fast Wireless low latency Gaming with your SBUS and or IBUS supported Radio Transmitter Receiver.
In order to enjoy playing your Favorite Simulator you will need to download the software in order to choose your protocol.
Once Software has been installed you can go ahead and solder your favorite SBUS or IBUS Receiver to the USB dongle and Start to enjoy your Wireless Low Latency GamePlay.
Low Latency Wireless Gaming is only one of its features.
The DroneMesh VUSB AIO can also help you with bricked Flight Controller, ESC's and Even reprogram your Flight Controller if you broke the USB.
This can also be used as a USB to SERIAL Converter as it is using the CH340G chip which is better and more stable than the FTDI Alternative.
The VUSB has an in built hardware inverter for the Sbus Protocol which is activated by bridging the pads marked SBUS.




Features:
-Play With Any IBUS AND SBUS Receiver on any Simulator through your Radio's recevier wireless.
-Inbuilt Hardware Inverter for Sbus Virtual Game Simulators
-Used to Flash and Program: Flight Controllers, PixHawk, Ardupilot ,Arduino , Betaflight, Inav, GPS Modules and Much More
-5V Output
-Based On Cleric's Open Source Project



Specification:
Brand Name: DroneMesh
Model: DroneMesh VUSB
Item Name: All In One Dongle
Application: Play With Frsky, Spectrum, FlySky, Futaba and More
Application 2: Flash and Reprogram Any Flight Controller, Arduino, GPS
Outout Voltage: 5V For Recveivers
Supported Protocol: IBUS , SBUS
Compatibilty: compatible for DRL, LiftOff, Freerider, HotProps, and Much more
Required Parts:SBUS or IBUS Recevier



---------------- SOFTWARE ---------------
Install them in the Order shown Below

VJOY Software
http://vjoystick.sourceforge.net/site/i ... l/download

Plugin for Vjoy
https://github.com/Cleric-K/vJoySerialFeeder/releases

---------------- FOR SUPPORT ---------------
Vist our forum for any Help or Questions

viewforum.php?f=38



More Info:
1. Program Module USB to TTL CH340G for STM32 Flight Controllers, ESC's Blehli_s and Blehli_32, Naze, Minim OSD, Frsky, Multi-wii, Ardiuno
1. Support WINDOWS XP / Server 2008 / Win7 / Win8 32 Bit / 64 / Win 10 32bit / 64bit
2. Support USB1.1 or USB2.0/USB3.0 for communication.
3. Simulation interface, you can upgrade serial peripherals.
4. Supports common MODE contact signal.
5. Can be uesed as an ordinary USB to Serial TTL module, download STC microcontroller
6. Standard interface, compatible with a variety of official Arduino controller
7. Original CH340G Chip Fater and Bettter Than FT232(FTDI) chip, stable performance



#How to Wire
USB SBUS.png
UBS IBUS.png
USB TO SERIAL.png
frits183
Posts: 4
Joined: Mon Jan 21, 2019 9:01 am

Mon Mar 11, 2019 7:36 pm

murry.tyler
Posts: 1
Joined: Mon Nov 04, 2019 12:38 pm

Mon Nov 04, 2019 12:47 pm

Hey what's up? I'm trying to flash a newbeedrone humming bird board with the plaid/venom hex file I cant get it to work as an st-link. What other flashing program can i use? It does show up on my computer on a com port. Any suggestions?
Post Reply