Has anyone got it to work?

Post Reply
ryszardgrudzinski
Posts: 2
Joined: Tue Mar 05, 2019 11:10 am

Tue Mar 05, 2019 11:26 am

Hi, are there any instructions on setting this up? Considering the high price I really think there should be :?

I soldered a new XM+ receiver, power it up and bound it to my radio. However I have no idea how to move on from here.

I have verified that I am using the correct com port (plugged/unplugged usb). Set the port in vJoySerialFeeder(1.4) to both "protocol defaults" as well as the values from Device Manager (windows 10 x64): 9600bps, 8 data bits, Parity:None, Stop bits:1.

Whatever I do I get: "Connected, Failsafe (Serial Port Read Timeout), 10 Updates per second / 100ms between updates".

I have looked into video descriptions, product sale pages, this forum. There appears to be exactly 0.0000 instruction on how to connect this up.
User avatar
DroneMesh
Site Admin
Posts: 182
Joined: Sun Sep 30, 2018 6:57 am

Mon Mar 11, 2019 8:21 am

Hi,

I will create a tutorial video on it today.
ryszardgrudzinski
Posts: 2
Joined: Tue Mar 05, 2019 11:10 am

Mon Mar 11, 2019 9:38 am

Thanks, Instructions would be very useful! Receiving the dongle and not being able to find configuration instructions is very frustrating. Especially that the board points to this forum.

To be honest though, in my case, the issue was not related to the configuration but probably to some cyanoacrylate on one of the sbus bridge pads (from repairing a different lifted pad). I eventually bridged the pads enabling sbus on the other side of the pcb and was able to fly.
User avatar
BrianJones
Posts: 1
Joined: Thu Apr 04, 2019 1:37 am

Sun Apr 07, 2019 9:49 pm

i have managed to hook my frsky transmitter to the reciever and can see it on the vjoy program but i haven't been able to use two chanells for each gimbel and they are only reconising just one
User avatar
DroneMesh
Site Admin
Posts: 182
Joined: Sun Sep 30, 2018 6:57 am

Sun Apr 14, 2019 3:52 pm

Watch this Video I show how to connect and configure it.

JTR1
Posts: 1
Joined: Sat Nov 30, 2019 7:22 pm

Sat Nov 30, 2019 7:25 pm

Thank you ! No More USB cable!!! Hehhhaaaaa
Post Reply