US65 Won't Arm

Discuss BNF / RTF Quadcopter Issues and Solutions
Post Reply
User avatar
DFulkerson
Posts: 1
Joined: Fri Nov 02, 2018 5:52 pm

Fri Nov 02, 2018 5:57 pm

My US65 is bound to my xlite. I've verified this in Betaflight in the Receiver and Modes tabs. I've also typed "status" in the CLI, and the only flags I get are CLI and MSP, which are normal. Once I unplug the micro USB from the US65 and plug in a battery, lights inside the canopy come on. When I hit my arming switch on my transmitter, one of the lights inside the canopy changes, so I know it is receiving a signal. However, the motors do not spin. Thoughts?
User avatar
DroneMesh
Site Admin
Posts: 182
Joined: Sun Sep 30, 2018 6:57 am

Thu Dec 20, 2018 6:12 pm

Can you attach your betaflight dump
JX3
Posts: 4
Joined: Thu Oct 04, 2018 1:18 pm

Sat Jan 05, 2019 1:03 pm

Try to push the throttle stick down while arming (like push it down into the plastic). If that doesn't work, calibrate your accelerometer and ensure you are starting from a level surface.
User avatar
DroneMesh
Site Admin
Posts: 182
Joined: Sun Sep 30, 2018 6:57 am

Sat Feb 02, 2019 6:23 am

It is the Channel Map order... Check your Xlite channel map and the betalight setting for channel map
Post Reply