Flysky FS-i6 Multiprotocol Mod
marcruhl wrote: ↑Wed Nov 07, 2018 3:17 pmI have got a working design now, but it still seems to be quite hard to print. It needs a perfectly leveled bed and quite a lot of support. I think I need about five days to further optimize it regarding 3D-Printing, if you want to tho, I can already send you the files to look at.
Sorry for needing so long, but I have quite a lot of stuff to do currently;)
I made the battery bay Flat, with inserts for AA batteries, AAA batteries or LiPos / LiIon's, so that you can individually choose which one you want and don't need to print a new housing when changing the battery type.
Here are some Pics of the current status (I know my print Quality currently SUCKS):
IMG_3513.JPG
IMG_3514.JPG
IMG_3512.JPG
IMG_3511.JPG
Any suggestions or ideas?
Is it ready for testing yet?
I would love to print it and show off your work on the channel.
keep me updated.
Hi,
can you advice? how did you bind flysky with TBS?
I connect TBS as you to flysky (PPM out to module and +, -)
nanoRX to FC (+ - and signal)
Ok - few hours latter...
It works! cheap flysky+crosfire
you have to connect rx and tx (same uart eg. tx1 and rx1) to nanoRX.
After that you have to connect your crosfire via USB, after that every thing should go smoothly. In my example crosfire detects nanoRX and bind it automatically (of course using agent X from TBS)
gl guys!
can you advice? how did you bind flysky with TBS?
I connect TBS as you to flysky (PPM out to module and +, -)
nanoRX to FC (+ - and signal)
Ok - few hours latter...
It works! cheap flysky+crosfire
you have to connect rx and tx (same uart eg. tx1 and rx1) to nanoRX.
After that you have to connect your crosfire via USB, after that every thing should go smoothly. In my example crosfire detects nanoRX and bind it automatically (of course using agent X from TBS)
gl guys!
HELLO I wanted to know how you did to bind the R9M with the R9mm on the Flysky i6x.
I made the connections well but I do not find how to binder. On the web I only see that we can bind with the frysky rx by also doing an update. That's why I'm asking for your help
I made the connections well but I do not find how to binder. On the web I only see that we can bind with the frysky rx by also doing an update. That's why I'm asking for your help
Same problem here. Any solution yet?tboon211 wrote: ↑Tue Jul 23, 2019 6:23 amHELLO I wanted to know how you did to bind the R9M with the R9mm on the Flysky i6x.
I made the connections well but I do not find how to binder. On the web I only see that we can bind with the frysky rx by also doing an update. That's why I'm asking for your help